Tubing:
The performance of the tube, which is guided in the interior
of the housing to extract oil or gas to the plant, is important. The hoses must
not only meet the same requirements facing resisting the housing, but also need
to resist the corrosive action of wellbore fluids, which is strong in some
areas. Technical Data used in the field explained in petroleum courses in
Rawalpindi.
API developed specifications, the basic needs of oil
and gas. '.2.4-7 API Specifications and Bulletins offer standard dimensions,
the strength properties and performance and where necessary ensure practiceto
full interchangeability. Tables 2:22 and 2:23 traction requirements andrange
hose lengths API type. 2:24 table are minimum performance characteristics of
the tubes. Tables 2:25 to 2:27, the dimensions, the weight and tolerances of
external pressure to give nonupset hoses and couplings. E integral interference
pipe (see Fig. 2/6 to 2/8). to convert the multiplication factors in
approximately linear significant net material is given in Table 2.28. The
equations for the calculation of the performance characteristics of the tubes in
the section on equations. Some more details of petroleum courses
in rawalpindi are as under
Pipeline construction
A number of pipe connections are useful if more force is
required to avoid the leak resistance or clearance nonupset of the provisions
of the standard, annoying API or integral hinges. These particular compounds
exhibit their improved properties to reflect by various means, such as clutches
or box ends with Teflon rings, etc.; special sealing profiles as Acme threads
or buttress; Torsion hinges: metal-to-metal seals; internal disturbances;
external shocks; Integral-joints; and joints flush. Piping Design: oil, water
and
Mud weighting factors necessary information on the factors
of oil, water and sludge density to obtain design in pipelines, see Table 2.14,
which lists these factors for housing. is in the same table used for hoses, the
style is applied. The following safety factors Safety factors are often used in
pipeline construction. These safety factors used.Example pipeline design. The
designer responsible for the selection of safety factors be specific
requirements: breakdown strength, I, 125; common, 1.80 performance; and
internal flow pressure. 1.00.Individual weight and pipe class. It includes
design data and safety factors for a 1 I, OOO-foot single weight and degree of
the gastric tube. TSK Training for Skills and Knowledge is the best institute
in Rawalpindi Islamabad for Pakistani Students who wants to join oil field
after petroleum
courses in Rawalpindi.
No comments:
Post a Comment