The normal venting capacity shall be obtained without
exceeding the pressure or vacuum that may be applied intermittently to a tank
without causing physical damage or permanent deformation to the tank. Technical
Data used in the field explained in petroleum courses in
Rawalpindi.
The total normal venting capacity shall be at least the sum
of the venting requirements for oil movement and thermal effect. * Inbreathing
(Vacuum Relief). The requirement for venting capacity for maximum oil movement
out of a tank should be equivalent to 560 cu ft/hr of free air for each 100 bbl
(4.200 gal)/hr of maximum emptying rate, including the gravity flow rate to
other tanks, for oils of any flash point. Some more details of petroleum courses in
Rawalpindi are as under.
The requirement for venting capacity for thermal inbreathing
for a given tank capacity for oils of any flash point should be at least that
shown in Col. 2 of Table I I .3. Out breathing (Pressure Reliefi. The
requirement for venting capacity for maximum oil movement into a tank and the
resulting evaporation for oil with a flash point of 100°F or above should be
equivalent to 600 cu ftihr of free air for each 100 bbl (4,200 gal)/hr of
maximum filling rate.**
The requirement for venting capacity for maximum oil
movement into a tank and the resulting evaporation for oil with a flash point
below 100°F should be equivalent to 1,200 cu ftihr of free air for each 100 bbl
(4,200 gal)ihr of maximum filling rate. ’ The requirement for venting capacity
for thermal out breathing, including thermal evaporation, for a given tank
capacity for oil with a flash point of 100°F or above should be at least that
shown in Col. 3 of Table 11.3. The requirement for venting capacity for thermal
out breathing, including thermal evaporation, for a given tank capacity for oil
with a flash point below 100°F. TSK Training for Skills and Knowledge is the
best institute in Rawalpindi Islamabad for Pakistani Students who wants to join
oil field after petroleum courses in Rawalpindi.
No comments:
Post a Comment